| |
 |
Follex HDPE paint absorbent masking film
White transparent film, printed to indicate the paint absorbent side.Film is light transparent to facilitate cutting.
Film is static to cling to the vehicle for optimal protection from overspray. Each roll is folded so that it will fit any dispenser and can be applied by just one person. |
|
| |
Hytiprotect 7 layer, paint absorbent
masking film
Blue grey multi layered masking film of which the outer layer (blue) is paint absorbent. The two colours indicate which side goes on the outside, so no mistakes are possible.
Grey side is static so that it clings to the vehicle and keeps out overspray,Hytiprotect is guaranteed to be 14 micron thick and is available in 4 different widths, 200cm, 380cm, 500cm, 600cm. |
|
|
| |
|
HDPE protection film
Green transparent film for protection against indirect overspray.
This film has not been made paint absorbent and can therefore only be used for masking in combination with paper. Economical solution for protecting stationary vehicles from dust. |
|
| |
Liquid masking
Transparant washable coating (non sticky) to be removed with water and spunge. |
|
|
| |
|
Alufoil
Protection foil for infrared drying in the vicinity of plastic parts. |
|
| |
Joint Stopper
Profile made from EPDM rubber for masking seams between parts. Two types available depending on the width of the seam.
To be applied on the outside. Ideal for masking the seams between the door and wing, where foam tape is harder or impossible to apply.
Also an ideal sollution for masking between headlight and wing, and headlight, hood and wing.Re-usable and washable. |
|
|
| |
|
Accessories for masking film
Moveable stand for one role of film (PLA 40) or for two roles of film (PLA 42).
Cutter for stand or luxury cutter for stand with guiding clip. The replaceable blades can be turned around to prolong usabillity, they are available in packs of ten blades.
Mask 'n Go is a starterkit for masking that consists of one sheet of film of 380cm x 630cm and one standard cutter. |
|
| |
| Daevi masking film with tape |
| . |
Pre-cut, static, transparent film on easy to handle small rols with tape allready attached to one side of the foil.
No dispenser necessary since the film can be easily torn straight by hand. First tear the adhesive tape and then tear the film in one swift movement. This way the film will always tear in a straight line!
Handy for small masking jobs and on bumpers, mirrors and spoilers. |
|
| |
Follex wheel well protection cover |
| . |
Re-usable canvas cover does not only protect the wheel and tire but the entire wheel well area from overspray.
Grab both handles to tighten the cover, insert in wheel well and the steel spring will secure the cover inside the well. Cover can be washed! |
|
| |
Magnet Sheets |
| . |
Pliable magnet sheets with circular opening (370mm diameter).
Fast masking for small primer jobs. Ideal for spot repairs. |
|
| |
| |
|
| |
